$135.00 incl GST
5 in stock
|Non Hold-Open||D-2550||D-2550P||D-2550 UNIV||D-2550T|
|Spring Strength||1-4 Spring Variable||1-3 Spring Variable|
|To EN11541-4 Spring Variable||–|
|External950MM/ 80KG||900MM/ 65KG|
|Internal1200MM/ 80KG||1050MM/ 65KG|
|To EN11541100MM/ 80KG||–|
Optional backing plate allows D-2550 Series Door Closers to be installed at hole pattern of Ryobi D-2100V series and other similar type door closers.
D-2550 Series Door Closers can be used on both RH and LH doors and on both push side and pull side mountings.
There are two speed ranges for door closing speed which can be adjusted by independent speed valves.
The non handed, optional hold open arm allows the door to be held open at any angles between 70 and 180 degrees.
When doors are violently opened by pedestrians or wind, the backcheck feature reduces the likelihood of damage should contact be made with an adjacent wall or obstacle.
D-2550 Series Door Closers have been successfully type-tested for conformity to all of the requirements of EN1154 ( including EN1634 Part. 1 )
D-2550 Series Door Closers meet with the requirements of ANSI/BHMA Grade 1.
|Dimensions||31 × 9.5 × 8 cm|